Diese Seite ist auf Englisch.
Changelog
1.3.2 — 2026-11-11
New
- Report a problem. A flag button in the header (and Settings › About › Report a problem…) sends a bug, an impression or a suggestion straight to us, with your app version and, if you leave it ticked, the recent warnings from the log. It works with or without a licence; without one, it asks for your email so we can answer. If the send fails, the draft is kept.
- The activation screen links to the pilot programme and has its own Report a problem link, for trouble before activation.
1.3.1 — 2026-10-13
New
- VST3 plug-in (coming as a free update, in final testing). The controller will also load as a Windows VST3 instrument in your DAW, with the same panel. It asks for the same licence key as the app and takes the same seat. It remembers your MIDI ports between projects, and works either by opening the interface itself (the quick way) or through the DAW's own MIDI routing (the standard way). See In your DAW.
- The first launch asks for the licence key from your purchase. Activation needs the internet once; after that the controller works offline.
- A Patch page next to the tone page: key mode, split points, dual detune, bender range, aftertouch and chase play, with the keys you play lit on the keyboard.
- In Split mode the editor splits the keyboard by key: notes from the Upper split point up play the Upper tone and notes below the Lower point play the Lower tone, on their own MIDI channels. The arpeggiator and the step sequencer follow the same split.
- A keyboard that sends key pressure per key (polyphonic aftertouch) is converted to the channel pressure the MKS-70 listens for.
- Morph pad. Four stored sounds sit in the corners of a pad and a dot blends them. The sound glides after the dot (instant, fast, smooth or slow), a mod wheel, key pressure or a macro can drive the dot across and a second one up and down, and the sheet can be pinned open to move the dot while you play. A click on a corner glides to it.
- Right-click any control for a compact menu: modulation source and amount, MIDI Learn, reset and copy to the other half.
- ARP, SEQ and MOD pages for the arpeggiator, step sequencer and modulation matrix, with step lanes that modulate any control and a ring on each modulated knob that shows where the modulation has it right now.
- The status rail turns red and says so when the unit stops answering a patch change, and Panic also clears what the unit was still holding.
Changed
- The sync chip, the tone reading and the first-run window explain once, in a sentence, why an original-ROM unit has to be read before its tones can be edited.
- Freeze is now the Sampler (Beta; a rebuilt Sampler on a native audio engine follows as a free update), a small DAW: a transport, an inspector (Source, Auto, Output, Tidy), the keyboard, a timeline of takes and an editor. Record a note, a chord, a chord progression, a pattern or a whole range — a note every 2 to 6 semitones, up to four velocity layers, repeats for round robin — then trim each take and set its loop by hand, with handles that snap to a zero crossing. Auto records a whole collection by itself: every preset of the unit, every progression on every preset, or every motion preset, each filed in its own numbered folder the moment it is done, with names and folder layout you choose. 24-bit WAV files (root note and loop inside the file) with an SFZ and a Decent Sampler preset.
- The top bar has five tabs for the pages — Tone, Patch, Arp, Seq and Mod — and the one you are on is lit. Volume moved to the right-hand end, the balance knob is gone (the Tones panel has it), and Init is red and says what it resets.
- The keyboard button in the top bar opens a list of every free MIDI input, and Keys play or DAW mode is chosen there. A keyboard another program is holding is named instead of silently dead, and the MIDI settings' Rescan ports now opens it again.
- One Panic now, in the bar at the bottom: it also hands the parameters back from the modulation. The second Panic and the second Analyser button in the top bar are gone.
- On the modulation page the envelopes and all four LFOs fit without scrolling; the step lanes are columns of the routing grid and are drawn on the Seq page only.
- Activation tokens are checked offline as before; a seat is dropped only when the server's answer is signed.
1.2.0 — 2026-10-04
New
- On first launch the app asks which firmware is fitted (Original Roland, Vecoven 3.x or Vecoven 4.x) instead of assuming one.
- The Tones panel has per-half Porta, Hold, Detune and Wheel LFO controls.
- Copy Upper → Lower and Copy Lower → Upper in Settings → Tools.
- A library sound can be exported as a
.syxfile the MKS-70 can receive. - Undo and redo for panel edits: Ctrl+Z, and Ctrl+Y or Ctrl+Shift+Z.
- An About tab in Settings shows the version.
Changed
- The Env Mode, LFO Waveform and Key Assign choices now follow Roland's manual. Sounds saved with earlier versions, in the library or as
.jsonexports, are converted when you recall them, so they sound as they did when you saved them. - The bank scan and the name check run only when you press Scan bank names, Rescan bank or Check in the Patch Browser. Earlier versions checked the bank at launch, which changed the patch on the unit and discarded its unsaved edit.
- On the Original Roland setting, selecting a stored tone for a half shows that tone's values if the app has seen the tone before. A tone it has not seen is marked TONE NOT READ, and edits to that half are held back instead of putting the previous tone back.
- On the Original Roland setting, the header Porta switch turns on the per-half portamento switches with the glide time, which is what that ROM needs to glide.
- A controller bound with MIDI Learn now drives only its control in the app and is no longer also passed on to the MKS-70.
- Choosing the MKS-70's own MIDI input as the master keyboard is ignored, so the synth cannot hear its own output.
- Arpeggiator and sequencer notes leave on time even when the app's window is behind other windows. Following MIDI clock, the tempo is smoothed over recent clock pulses instead of jumping with each one.
- Settings: the Reset tab is now Tools. The undocumented patch bytes are on the Advanced tab behind Show raw bytes. The label size, fader width and button height sliders were removed; Knob throw remains.
What 1.2.0 includes
- Every parameter of both tones and the patch on one screen, in signal order: DCO 1 and 2, mixer, filter, amplifier, LFO, chorus, both envelopes and the per-half patch settings. 126 parameters in 24 groups; see Parameter reference.
- Support for the original Roland ROM (whole-block edits) and Vecoven 3.x and 4.x (single-parameter edits), with the five Vecoven 4.x parameters shown only on 4.x.
- Reading the instrument: selecting a patch adopts what the unit sends back.
- A patch browser for the 128 slots that learns patch and tone names as you browse, with an optional bank scan.
- A library on your computer, import of
.syx,.midand.jsonfiles and folders, and.jsonand.syxexport. - A guided write: the app puts the sound on the slot you choose; you press WRITE on the unit.
- A 16-slot modulation matrix with four LFOs, two envelopes, four macros and keyboard sources, and a MIDI bandwidth meter.
- An arpeggiator and a 16-step sequencer with four modulation lanes, on the internal clock or MIDI clock, with clock out.
- 178 factory motion presets, and your own.
- MIDI Learn on every panel control, a master keyboard input, and a button that releases the MIDI ports to another program.