Zum Inhalt springen
Knobsmith
Menü

Diese Seite ist auf Englisch.

Sampler

The Sampler plays the MKS-70, records what comes back on your audio input and files the result as an instrument other samplers can load. It is laid out like a small DAW: a transport on top, an inspector on the left, the keyboard, a timeline of takes and an editor. Open it with Sampler in the top bar.

The Sampler is a Beta in this version. It records through the computer's standard audio path, so the timing of each take is found from the sound itself rather than measured. A rebuilt Sampler on a native audio engine (ASIO, WASAPI and Core Audio, sample-accurate timing, per-note tuning, automatic velocity layers) follows as a free update.

You need the unit's audio return connected to the audio input chosen in Settings → Audio (the level meter in the top bar should move when you play a key).

The way to work

  1. Choose. In Source, say what to record and drag across the keyboard to choose the keys.
  2. Test. The waveform key in the transport sounds a note for a moment, so you can set the level before anything is recorded.
  3. Record. The red key records. Each take appears on the timeline as it is played, with a red head at its end.
  4. Check. Click a take: it plays and opens in the editor. Drag its start, end and loop handles; the playhead follows what you hear. Play plays the whole timeline from the selected take; a click on the ruler plays from there.
  5. Save. Save files the takes into the folder chosen under Output.

Transport

Stop, Play, Test note and Record, a clock, what is happening and how far it has got, the level meter in decibels, and Save. Stop ends a run or a playback.

Inspector

The four tabs run in the order you use them.

1 Source — what to record.

Keys A note every few semitones across the keys you dragged over. Notes is Few, Normal or Many; Dynamics is one layer, a soft and a hard one, or three.
Note One held note.
Chord The chord set on the arpeggiator page.
Chords A chord progression in a key, one take per chord (twelve progressions, from I–V–vi–IV to ii–V–I). Each chord is on its own key from C2, so the finished instrument plays the progression chord by chord. Choose All progressions to record every one.
Pattern The sequencer and the modulation as they are set, for a number of bars.

Hold is how long each key is held: Short, Normal or Long.

2 Auto — record a whole collection by itself and file each part the moment it is done.

  • Presets: every preset from the first to the last you choose (all 128 at most). The unit is sent to each patch in turn, its name is read, and the set is recorded the way Source says. With Chords chosen, every progression is recorded on every preset.
  • Motion: every motion preset of the Seq, Mod and Arp pages, each played for the number of bars set under Pattern.

The line under the choices says how many items, takes, minutes and megabytes the run will be. An automatic run needs its folder first; it writes as it goes, so it can run for hours without keeping the audio in memory, and a stop or a crash loses only the item in hand.

3 Output — where the files go and what they are called.

  • Folder: asked once per session; the dialog opens where you chose last time.
  • Names: Set_Note_Velocity, Set_001_Note_Velocity or 001_Preset_Note_Velocity. Notes are written Fs3, never F#3, and nothing a file system refuses is ever used.
  • Layout: Instrument is Set/Set.sfz with the WAVs in Set/Samples/; One folder puts everything side by side.
  • The line under it is the path of the first file a run will write.

An automatic run files each item in its own folder under the set's: Set/001_Hollow_Space/…, numbered the way the unit sorts them; motion presets go under Motion/<scope>/; a progression recorded on a preset goes under that preset's folder.

4 Tidy — how each take is cleaned up: the set name, repeats for round robin, the tail, latency (Measure, then Align), trim of the quiet before and after, a short fade, level (Off, Set, Each) and Find loops.

The timeline

Takes sit one after another in the order they were recorded, one track per velocity layer. A queued take is an outline, the one being recorded grows, a finished one carries its waveform; a loop is tinted and a cut is dimmed. Ctrl + wheel zooms around the pointer, the wheel alone scrolls, Fit shows the whole run. In an automatic run a strip above the timeline lists the items; click one to see its takes (an item that has been filed shows the outline of its takes only, as its audio is on disk).

The editor

The selected take, large, with a ruler. Drag S and E to cut the start and the end, and the two L handles to move a loop; every handle snaps to an upward zero crossing, so a cut or a loop seam never lands on a click. Add loop puts a loop in the middle of the take, No loop removes it, Reset cut puts back the start and end the run found. Wheel to zoom, Shift + wheel to scroll, click the waveform to play from there.

What is written

  • one 24-bit WAV per good take, with the root note and any loop stored inside the file;
  • <set>.sfz, which Sforzando, sfizz, HALion, Bitwig and most samplers read;
  • <set>.dspreset, for the free Decent Sampler plug-in.

Silent or failed takes are left out, and their neighbours take over their keys, so there is no hole on the keyboard. A manual run keeps its audio in memory until you close the app or run again, so Save before you do.


ASIO is a trademark and software of Steinberg Media Technologies GmbH.

ASIO compatible