Modulation
The MKS-70 has one LFO and two envelopes per tone and no modulation matrix. The app adds one outside the instrument: its own sources drive MKS-70 parameters by sending edits many times a second, down the same path the knobs use.
Open the MOD page with its tab in the header; ARP and SEQ are the pages beside it. This page covers the matrix; Arpeggiator and sequencer covers the other two.
Sources
| Source | Notes |
|---|---|
| LFO 1 to LFO 4 | Rate in Hz, or synced to the tempo from 8/1 to 1/32, with dotted and triplet values. Waves: Sine, Tri, Saw, Ramp, Square, Exp, S & H, Drift. Shape and Phase controls. Trigger Free, or Key to restart on each note. Swings both ways. |
| Envelope 1, Envelope 2 | Triggered by the master keyboard. Delay, attack, hold, decay, sustain and release, plus curve and velocity. Mode Gate, Loop or Once; retrigger Each or Legato. |
| Step 1 to Step 4 | The four sequencer lanes. They move while the sequencer plays. Route them in the grid's STEP columns and draw their steps on the SEQ page; a click on a STEP cell opens that lane there. |
| Macro 1 to Macro 4 | Knobs in the right-hand column. You can name them and bind each to a hardware controller. |
| Mod Wheel, Velocity, Aftertouch, Pitch Bend, Note Number | From the master keyboard. Pitch Bend swings both ways. |
| MIDI CC | Any controller number from 0 to 119 on the master keyboard port. |
The LFO and envelope settings are on the left of the MOD page, under the LFOs and Envelopes tabs. All four LFOs, and both envelopes, are in view at once, with no scrolling. The macros are the narrow column on the right.
Sources that read the keyboard need a Master keyboard in Settings → MIDI. Without one, the window says so and those routes stay at zero.
Routings
The matrix has 16 slots. Each routing row has:
| Column | What it does |
|---|---|
| On | Arms or bypasses the routing. |
| Source | Where the movement comes from. |
| CC # | The controller number, when the source is MIDI CC. |
| Destination | The MKS-70 parameter it moves. |
| Depth | How far, as a percentage of the destination's range. Negative depth moves the other way. |
| Output | What the routing is sending now. |
To add one, click + Add routing and choose a source and destination. Click ▸ on a row for its processing: Invert, Curve, a Range window on the source, Slew (smoothing) and Via, a second source that scales the depth. For example, aftertouch as Via gives "press harder for more wobble".
Rows and Grid switch between the list and a grid of sources against destinations. Clear all disarms every slot and hands every parameter back to the panel.
Routing from the panel
You do not have to open the page. Right-click any knob on the panel and choose a source from the menu: LFO 1 to 4, Envelope 1 and 2, Macro 1 to 4, Mod Wheel, Aftertouch or Velocity. A small depth editor opens beside the knob. Right-clicking the same knob again and choosing a different source replaces the route rather than adding a second one. Remove from matrix and Open the matrix… are in the same menu.
With the Edit Target on Both, a route made from a tone knob reaches both halves.
What the panel shows
A knob that something modulates gets a ring in the source's colour. The ring shows how far the routing can move it, and lights while the engine runs.
How the matrix meets the panel
A routing adds to the knob's value. The knob keeps showing the patch's value and keeps working: turn it and the modulation moves around the new position. Turning a routing off sends the knob's value back to the unit.
Sequencer lanes can also drive a parameter. A lane in Rel mode adds to the panel value in the same way. A lane in Abs mode sets the value outright: while it is aimed at a parameter, that knob has no effect on the sound. The panel marks lane targets in the sequencer's colour. See Arpeggiator and sequencer.
What cannot be modulated
The app refuses some destinations and tells you why on the row:
- the tone numbers, because each write loads a stored tone;
- Key Assign, because each write re-voices the unit;
- the portamento switch, which works only with its time setting;
- other patch-level switches;
- the undocumented raw patch bytes;
- the five Vecoven 4.x parameters, unless the firmware setting is Vecoven 4.x.
Set these by hand on the panel.
Run, rate and the MIDI budget
The transport at the top of the window is shared by all three tabs; see Arpeggiator and sequencer. Arm the matrix with Mod, then press Run.
The matrix sends edits on its own clock, set by Matrix rate in the clock setup (open it with the Clock chip): 5 to 40 Hz, 20 Hz by default. It sends only parameters whose value has changed. An LFO cannot run faster than half the matrix rate; a free LFO is capped there, and a synced LFO that would be faster is slowed to fit.
The meter at the right of the transport shows messages per second and the share of the MIDI cable all three engines use together. Above about 60 % the app warns you: notes start competing with edits and timing suffers. Lower the matrix rate, use fewer routings, or thin the pattern. On the Original Roland firmware setting every edit is a whole block, so the same routing uses much more of the cable. See Firmware.
Problems that stop the engines reaching the synth, such as no MIDI out or Standby, appear as one line under the transport.
Presets
The strip above the transport loads and saves matrix presets. See Arpeggiator and sequencer.