このページは英語です。
Getting started
The MKS-70 Controller is an editor, librarian and control surface for the Roland Super JX: the MKS-70 rack and the JX-10 keyboard. This page takes you from purchase to a patch on screen.
What you need
- A computer with Windows 10 or 11, 64-bit.
- A Roland Super JX (MKS-70 or JX-10), with the original Roland ROM or Vecoven 3.x or 4.x firmware.
- A MIDI interface with an output to the instrument's MIDI IN.
- A second MIDI cable from the instrument's MIDI OUT back to an input on your interface. Without it the app can send edits but cannot read patches, patch names or the real positions of the controls.
- An internet connection for activation. After that the app runs offline.
Download
Sign in at knobsmith.com/account.
Download the Windows installer,
MKS-70-Controller-Setup-1.3.2.exe(about 109 MB).The VST3 plug-in for your DAW is coming as a free update; see In your DAW.
Optional: check the file. The account page shows its SHA-256 checksum. In PowerShell, run:
Get-FileHash .\MKS-70-Controller-Setup-1.3.2.exe -Algorithm SHA256The value printed must match the one on the account page. If it does not, download the file again.
Install
The installer is not code-signed yet, so Windows SmartScreen may warn you the first time you run it.
- Run the installer.
- If Windows shows "Windows protected your PC", click More info, then Run anyway.
- Accept the licence agreement.
- Choose the installation folder, or keep the default.
- Finish the installer. It creates a desktop shortcut and a Start menu entry.
The app keeps your settings, library and window position in %APPDATA%\MKS-70 Controller. Uninstalling the app leaves that folder in place, so a reinstall finds your library again.
Only one copy of the app runs at a time. Starting it a second time brings the open window to the front.
Activate
- Start the MKS-70 Controller.
- When the app asks for your licence key, enter the key from your purchase email or from the account page. It looks like
MKS70-XXXX-XXXX-XXXX-XXXX. - The app activates online once. After that it does not need the internet.
One licence covers three computers. See Licence and activation to move it to another computer.
Tell the app which firmware is fitted
On first launch the app asks Which firmware is in your MKS-70? Choose Original Roland, Vecoven 3.x or Vecoven 4.x.
If you have never had a Vecoven upgrade installed, or you are not sure, choose Original Roland. It works on every unit. You can change the setting later in Settings → Instrument. Firmware explains the difference.
Connect the instrument
- Connect your interface's MIDI OUT to the MKS-70's MIDI IN.
- Connect the MKS-70's MIDI OUT to a MIDI IN on your interface.
- In the app, click the gear icon in the header to open Settings, then the MIDI tab.
- Choose your interface under MIDI out — edits and notes go here.
- Choose the input the MKS-70 is connected to under MIDI in — the unit's replies.
- Set Channel to the MIDI channel the MKS-70 receives on.
- Optional: choose your keyboard under Master keyboard to play the MKS-70 through the app.
Connecting covers interfaces, channels and sharing ports with a DAW.
Load a patch
- Close Settings.
- Click the display in the header (it reads BROWSE in its corner) to open the Patch Browser, or use the arrows either side of it to step through patches.
- Click a slot. The app selects that patch on the MKS-70, and the unit answers with the patch and both of its tones.
- The panel shows the patch's real values. The status line in the display reads SYNCED.
If it reads NO REPLY or NO MIDI IN instead, see Troubleshooting.
The first time, the slot list shows slot numbers only. To see every patch by name, press Scan bank names in the Patch Browser. The scan selects all 128 patches in turn, so it discards any unsaved edit on the unit. See Library.
Edit, and keep what you make
Every control on the panel edits the MKS-70's edit buffer straight away. The MKS-70 has no MIDI command that writes to its own memory, so to keep a sound on the instrument you press WRITE on its front panel. To keep a copy on your computer, save it to the library. See Library.
Next
- The panel: every section of the editing screen.
- Modulation: the modulation matrix.
- Arpeggiator and sequencer.