本文へスキップ
Knobsmith
メニュー

このページは英語です。

Library

Click the display in the header to open the Patch Browser. The rail on the left switches between Synth (the MKS-70's 128 slots), Library (sounds on this computer) and Imported (sounds read from files). The search box filters the list.

The synth's slots

The MKS-70 selects patches by Program Change, with no bank select, so all 128 are one list:

Program Slots
0–63 Internal memory, A1 to H8
64–127 Cartridge, Cart A1 to Cart H8

Filter it with Bank A to Bank H or Cartridge. Click a slot to select it on the unit; the panel then shows the values the unit sends back.

How names are learned

The MKS-70 has no command that sends its bank. It sends a patch's name, and the names of its two tones, when that patch is selected. The app keeps every name it receives, so the list fills in as you browse.

Slot shows Meaning
The patch name and its two tone names Read from the unit.
— empty —, marked empty Read from the unit; its stored name is blank. Safe to write into.
The slot number and not read Never read: unknown, not empty.

Scan bank names

Scan bank names (later Rescan bank) selects all 128 patches in turn, records what each sends, and returns to the patch it started on. It takes about half a minute.

Check reads eight slots across the bank and says which, if any, no longer match the stored names, for example after a cartridge change.

Forget clears the stored names.

Scanning and checking both select other patches on the unit. Selecting a patch reloads it from memory, so any unsaved edit on the MKS-70 is lost. Neither runs unless you press it.

If the unit answers nothing for three slots in a row, the scan stops. See Troubleshooting.

Your library

The library keeps sounds on this computer, in %APPDATA%\MKS-70 Controller. These copies survive selecting another patch on the unit, which discards an unsaved edit there.

Save the current sound

  1. Select or read a patch so the editor holds the complete sound.
  2. Click + New preset in the browser toolbar.
  3. Type a name and press Enter, or click Save.

If the editor does not hold a complete sound yet, the app asks you to select a patch first. Saving under an existing name in the same folder replaces that sound.

With an empty library, Start from INIT loads a plain starting sound into the editor and the unit, and opens the name field.

Library actions

Click a sound to send it to the unit's edit buffer and play it. Each row also has:

Action What it does
→ Slot Loads the sound into a slot's edit buffer, ready to store. See Store a sound on the MKS-70.
Rename Renames it in the library.
Export Writes it as a .json file.
.syx Writes it as a .syx file the MKS-70, or another librarian, can receive.
Del Deletes it from the library.

A .syx export contains the patch block only if the unit has sent the app a patch; otherwise it holds the two tones only, and the app says so. Read a patch from the unit first for a complete file.

Importing files

The app reads .syx files of MKS-70 patch and tone dumps (single sounds or whole banks), .mid files carrying those dumps, and .json files it exported.

  1. Click Import files… or Import folder…, or drag files or a folder onto the browser.
  2. The sounds appear under Imported. A folder's sub-folders become folders on the rail.
  3. Click a sound to send it to the unit and hear it, or Keep it in the library. Keep N in library keeps everything listed.

Imported sounds stay in memory until the app closes; only the ones you keep are saved. Clear empties the list. Kept folders appear on the Library rail, where Delete "folder" removes a whole folder.

Store a sound on the MKS-70

The MKS-70 has no MIDI command that writes to its memory; everything the app sends changes the edit buffer only. To keep a sound on the unit, you press WRITE on its front panel. The browser puts the sound on the right slot first:

  1. Click Write current sound → in the toolbar, or → Slot on a library or imported sound.
  2. Choose the slot. Empty slots are highlighted.
  3. The app selects that slot on the unit and loads the sound into its edit buffer.
  4. On the MKS-70, press WRITE and store the patch to that slot.

A patch stores which tones it uses, not the tones themselves. If you edited the Upper or Lower tone, also write each tone to tone memory on the unit, or the patch will play the old tone.

The patch name is not sent by this procedure. To name the patch, rename it on the unit, or use Settings → Names after step 3 and before you press WRITE.

Names

Settings → Names edits the Patch Name (18 characters) and the Upper and Lower Tone Name (11 characters each). Press Enter or leave the field to send a name to the edit buffer. The unit must have sent its current patch first; if a name will not send, use Read from unit on the Instrument tab. Names are stored only when you press WRITE on the MKS-70.

Read and send the whole sound

In Settings → Instrument, Read from unit selects the unit's current patch again so it sends it; this discards unsaved edits on the unit. Send all sends the complete sound in the editor, and refuses until the editor holds one.